Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 73

Code
CAPI3000 E302:
CAPI3000 E303:
CAPI3000 E304:
CAPI3000 E305:
CAPI3000 E306:
CAPI3000 E309:
Table 6. CAPI3000 Error Codes
Message and Description
CAPI Connect Request: Virtual Server aaaaaaaa: Cannot
allocate call entry!
A CAPI Connect Request from the specified application
was rejected because all available call entries were active
and in use.
CAPI Connect B3 Request: Virtual Server aaaaaaaa:
Invalid PLCI <0xhhhhhhhh>!
A CAPI Connect B3 Request was received from the
specified application, but no call with the specified
Physical Link Connection Identifier was in progress.
Message discarded.
CAPI Data B3 Request: Invalid data length dddd or
address <0xjjjjjjjj>, NCCI <0xhhhhhhhh>!
A CAPI Connect B3 Request was received from the
specified application, but the message at location jjjjjjjj
with an NCCI of hhhhh was corrupted. Message ignored.
CAPI Data B3 Request: Virtual Server aaaaaaaa/Port p/
Bn: No buffer available, NCCI <0xhhhhhhhh>!
A CAPI Data B3 Request was received for VS3000
aaaaaaaa, port p, channel Bn, but no there were no
available buffer headers. A queue full status was
returned to CAPI.
CAPI cmd_type: No call entry for PLCI <0xhhhhhhhh>!
A CAPI cmd_type was received but no active call entry
could be found for the request's Physical Link Connection
ID. Message discarded.
Valid cmd_types:
Disconnect Request
Connect Request
Connect Active Request
Disconnect Response
CAPI Connect B3 Response: No call entry for NCCI
<0xhhhhhhhh>, reject code <0xrr>!
A CAPI Connect B3 Response was received but no active
call entry could be found for the request's Network
Control Connection ID. Message discarded.
Error Codes and System Messages
73