Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 79

Code
CAPI3000 E804:
CAPI3000 E805:
CAPI3000 E806:
CAPI3000 E807:
CAPI3000 E808:
CAPI3000 E809:
CAPI3000 E810:
CAPI3000 E811:
Table 6. CAPI3000 Error Codes
Message and Description
Unable to output initial 'binary load' command to Virtual
Server aaaaaaaa (#dd) on NIC board dd!
An attempt to initiate the binary load of VS3000
aaaaaaaa but the request was rejected.
Unable to output 'binary load' command to Virtual Server
aaaaaaaa (#dd) on NIC board dd!
An attempt to continue loading VS3000 aaaaaaaa but the
request was rejected.
Load failed on Virtual Server aaaaaaaa (#dd) on NIC
board dd, no response!
After successfully outputting a load request for VS3000
aaaaaaaa, no response was received.
Unable to retry output 'binary load' command to Virtual
Server aaaaaaaa (#dd) on NIC board dd!
After having at least once received an acceptable
response to the transmission of a binary load command to
VS3000 aaaaaaaa, another request to send another block
of binary data failed after retrying.
Load of Virtual Server aaaaaaaa (#dd) failed, NACK
retries exceeded!
An attempt to binary load VS3000 aaaaaaaa failed due to
an excessive number of rejections from the VS3000.
Unable to retry output 'binary load' command to Virtual
Server aaaaaaaa (#dd) on NIC board dd!
After having at least once received an acceptable
response to the transmission of a binary load command to
VS3000 aaaaaaaa, additional retry requests reached a
maximum retry limit.
Load failed on Virtual Server aaaaaaaa (#dd), checksum
error!
The binary load of VS3000 aaaaaaaa failed due to data
corruption across the link.
Unable to output 'binary load' command to Virtual Server
aaaaaaaa (#dd) on NIC board dd!
The binary load command to VS3000 aaaaaaaa could not
be output across NIC card dd.
Error Codes and System Messages
79