Removing Vs-Link For Novell - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

Installing VS-Link (Novell)

Removing VS-Link for Novell

If you are installing VS-Link for the first time, skip this section.
If you have an earlier version of VS-Link for Novell installed, follow the
instructions below to remove it before installing this version.
1. At the command line prompt, enter load install.
The Installation Options menu is displayed:
2. Select Product options.
The Other Installation Actions menu is displayed:
3. Select View/Configure/Remove installed products.
14 Removing VS-Link for Novell