Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 65

Code
CAPI3000 E011:
CAPI3000 E012:
CAPI3000 E013:
CAPI3000 E014:
CAPI3000 E015:
CAPI3000 E016:
CAPI3000 E017:
Table 6. CAPI3000 Error Codes
Message and Description
Registration of virtual server #n failed, reason <0xhh>!
Registration of VS3000 ISDN driver with the CAPI
Manager failed. Fatal, since driver initialization fails.
If reason = 1001, too many applications.
If reason = 1002, invalid block size.
If reason = 1003, invalid buffer size.
If reason = 1004, invalid message buffer.
If reason = 1005, invalid connect number.
If reason = 1006, busy.
If reason = 1007, OS resource error.
If reason = 1008, CAPI not installed.
If reason = 1009, no external equipment.
If reason = 100A, no internal equipment.
If reason = 100B, invalid signal type.
If reason = 10F0, too many applications.
If reason = 10F1, invalid function array.
If reason = 10F2, invalid controller information.
No other reason codes are defined.
All n possible InterChangeVS 3000 virtual servers
already installed!
Maximum number of VS3000 units have been attached to
and configured for this server. Check server configuration
to determine why so many VS3000s are enabled.
Request for NetWare resource tags failed!
Fatal error. The VS3000 driver cannot allocate resources
unless NetWare allows, which NetWare does by issuing
'resource tags.'
Couldn't attach polling procedure!
The VS3000 driver could not activate its background idle
process. Fatal error.
No identifiable 'CAPINAME=' parameter!
The VS3000 driver load line did not contain a VS3000
configuration name.
Requested virtual server name (aaaaaaaa) is already in
use!
Attempted to load a VS3000 already initialized and
configured.
Path pppppppp to configuration directory not found!
Could not retrieve a VS3000 configuration file because
the Comtrol-unique directory does not exist. Rerun the
configuration utility and save the configuration file.
Error Codes and System Messages
65