Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 87

Table 7. CAPI3000 Informational Codes
Code
CAPI3000 I212:
(continued)
CAPI3000 I213:
Message and Description
where ssssssss is one of the following ASI error
classes:
No Resource
Syntax Error
Invalid State
(?)
where cccccccc is one of the following ASI error codes:
Unknown resource type
Resource not accepting requests
No resource available
Resource type not configured
Invalid command
Invalid command length
Invalid parameter tag
Invalid parameter length
Invalid parameter value
Invalid AEI
Invalid PEI
Invalid AEI/PEI pair
Insufficient parameters
Not valid Connect phase
Not valid Disconnect phase
Not valid Active phase
Not valid Idle phase
Code not valid SPID request
(?)
The above console output is generated when the
operator selects the VS3000 configuration utility
diagnostic option for Event Logging and an Nb_Error
Indication is received from VS3000 aaaaaaaa, port p,
indicating that the specified command failed for the
indicated reason.
ASI Disconnect Confirmation: Virtual Server
aaaaaaaa/Port p: Selected Call Appearance now dd.
The above console output is generated when the
operator selects the VS3000 configuration utility
diagnostic option for Event Logging and a Selected
Call Appearance ASN1.1 element is processed in the
Nb_DISCONNECT Confirm message from VS3000
aaaaaaaa.
Error Codes and System Messages
87