Binding Ip/Ipx To The Vs3000 Ports - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

Installing VS-Link (Novell)

Binding IP/IPX to the VS3000 Ports

Follow these steps. (IPX is used as an example. In your installation
you may be configuring IP. Copy this procedure and adapt as needed.)
1. Beginning at the Protocol To Interface/Group Bindings window,
press Insert.
The list of configured protocols is displayed.
2. Select IPX and press Enter.
The list of configured network interfaces is displayed:
3. For each configured port, do the following:
a. Select the next available PPP port on the VS3000. The Binding
IPX to a WAN Interface window is displayed.
b. Press Esc to close this window. You are asked if you want to
save IPX bind parameters.
c. Select Yes and press Enter.
4. When you are finished with all ports, press Esc to return to the
Protocol To Interface/Group Bindings window.
5. Press Esc to return to the Internetworking Configuration menu.
6. Press Esc to exit INETCFG. You are asked to confirm that you
want to do so. Select Yes and press Enter.
7. Down and restart the server, so that your changes take effect.
44 Configuring NetWare Connect (NWC)