Error Codes And System Messages; Table 6. Capi3000 Error Codes - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

Error Codes and System Messages

Code
CAPI3000
CAPI3000 E001:
CAPI3000 E002:
CAPI3000 E003:

Table 6. CAPI3000 Error Codes

Message and Description
vsservername: aaa—aaa
Generic system message, where aaa—aaa is unfiltered
administrative data from the VS3000 vsservername.
Error, data block length dddd, must be >= minimum and
<= maximum!
The application specified a data block length less than
the minimum (128) or greater than the maximum (4540).
Data block length specifies the maximum size of a B
channel data unit that can be transmitted or received.
Selecting a protocol that requires larger data units, and
attempting to transmit or receive larger data units,
results in an error returned by the NetWare CAPI
Manager [or driver]. The NetWare CAPI Manager and
compliant NetWare CAPI drivers support a maximum
data block length of 4540 octets.
Error, message buffer size dddd, must be >= minimum
and <= maximum!
The application specified a message buffer size less than
the minimum (1024) or greater than the maximum (9216,
or ((minimum * the number of ISDN ports on a VS3000) +
minimum). Message buffer size is the total of all available
space the sponsoring application requires for all ports.
Error, invalid signal type <0xtt>, must be either
'Callback' <0xhh> or 'Local Semaphore' <0xhh>!
The inbound traffic signaling mechanism must be either
Callback (when an inbound message is available, the
CAPI driver stack calls a specified application
notification function, supplying the application context
value; the application then should retrieve the message
by calling the CAPI_GetMessage function), or Local
Semaphore (when an inbound message is available, the
CAPI driver stack signals the local semaphore causing
the application process to wake up and retrieve the
message by calling the CAPI_GetMessage function).
Other signalling mechanisms are not recognized.
63