Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 88

Error Codes and System Messages
Table 7. CAPI3000 Informational Codes
Code
CAPI3000 I214:
CAPI3000 I300:
CAPI3000 I301:
CAPI3000 I800:
88
Message and Description
ASI Disconnect Indication: Virtual Server aaaaaaaa/
Port p: Received with no discernible cause.
The above console output is generated when the
operator selects the VS3000 configuration utility
diagnostic option for Event Logging and a
Nb_DISCONNECT Indicate message from VS3000
aaaaaaaa, port p, had no disconnect reason code.
Virtual Server aaaaaaaa/Port p/Bn: Incoming call
from servername ignored by Application IDn.
Application returned an "ignore call." Normally this
allows other devices on an S/T bus to answer the call;
however, this event may mean a discrepancy between
the configuration of the VS3000 SPIDs and DNs and
the configuration of the application. The VS3000 port
will be tied up until a timeout cleans up the call.
Virtual Server aaaaaaaa/Port p/Bn: Incoming call
ignored by Application IDn.
Application returned an "ignore call." Normally this
allows other devices on an S/T bus to answer the call;
however, this event may mean a discrepancy between
the configuration of the VS3000 SPIDs and DNs and
the configuration of the application. The VS3000 port
will be tied up until a timeout cleans up the call.
VS3000 [00C04E0xyyyy] aaaaaaaa (#dd) reconfigure
pending.
The above console output is generated when the
operator reconfigures VS3000 aaaaaaaa at MAC
address 00C04E0xyyyy while that VS3000 is active.