Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 82

Error Codes and System Messages
Table 7. CAPI3000 Informational Codes
Code
CAPI3000 I003:
CAPI3000 I004:
CAPI3000 I200:
82
Message and Description
Port 1 Layer 1: aaaaaaaa
Port 2 Layer 1: aaaaaaaa
Port 3 Layer 1: aaaaaaaa
Port 4 Layer 1: aaaaaaaa
where
aaaaaaaa is either:
Deactivated
Ident Input
Synchronized
Activated
Lost Framing
(unknown)
bbbbbbbb is either:
Down
Pending
Up
(unknown)
The above console output is generated when the
operator selects the VS3000 (vs3kcfg) configuration
utility diagnostic option for Port Status.
Virtual Server aaaaaaaa (#dd):
State.......ssssssss.
Last event..eeeeeeee.
The above console output is generated when the
operator selects the VS3000 (vs3kcfg) configuration
utility diagnostic option for Controller FSM. dd is the
concentrator index number.
ASI cmd_type Diagnostics: Virtual Server aaaaaaaa/
Port p/Bn: <0xhh 0xhh...0xhh 0xhh>
The above console output is generated when the
operator selects the VS3000 configuration utility
diagnostic option Event Logging, and a Diag ASN1.1
element is received as part of an ASI D-channel
message from VS3000 aaaaaaaa, port p, channel Bn.
Valid cmd_types:
Event Indication
Disconnect Confirmation
Disconnect Indication
Layer 2: bbbbbbbb
Layer 2: bbbbbbbb
Layer 2: bbbbbbbb
Layer 2: bbbbbbbb