Configuring Network Security; Configuring Nwcap, Pap, And Chap - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

Installing VS-Link (Novell)
d. Enter an ISDN Sub-Address, if provided.
e. Press Esc. You are asked if you want to save your changes.
f. Select Yes and press Enter. You are returned to the Network
Interfaces window. The channel should now show a medium of
PPP and a status of Enabled.
g. Repeat this process for each channel on the VS3000.
3. When you are done, press Esc to exit to the Internetworking
Configuration menu.
4. Press Esc to exit from the configuration utility. You are asked to
confirm that you want to exit INETCFG.
5. Select Yes and press Enter.
The Configuration Options menu is displayed.

Configuring Network Security

Use the Security option on the Configuration Options menu is set up
user and port restrictions and set remote client passwords as needed.
For more information, press F1 to see the online help.

Configuring NWCAP, PAP, and CHAP

Follow these steps:
1. Select Services from the Configuration Options menu. The list of
available NetWare Connect Services is displayed.
2. Select PPRNS.
The PPPRNS Configuration Options menu is displayed.
3. Select Configure Security.
The PPPRNS Security Configuration menu is displayed.
4. Press Enter to toggle between Enable and Disable.
After PPRNS security is enabled, you can toggle NetWare Connect
Authentication Protocol (NWPAP), Password Authentication
Protocol (PAP), and Challenge Handshake Authentication Protocol
(CHAP).
5. When you are done, press Esc. You are asked if you want to save
your changes.
6. Select Yes and press Enter.
The PPPRNS Configuration Options menu is displayed.
7. Select Exit, or press Esc. You are asked to confirm that you want to
exit PPPRNS configuration.
40 Configuring NetWare Connect (NWC)