Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 70

Error Codes and System Messages
Code
CAPI3000 E202:
CAPI3000 E203:
CAPI3000 E204:
CAPI3000 E205:
CAPI3000 E206:
CAPI3000 E207:
CAPI3000 E208:
CAPI3000 E209:
70
Table 6. CAPI3000 Error Codes
Message and Description
No ECBs available to send ASI packet to Virtual Server
aaaaaaaa via NIC dd!
No ECBs were available to issue an ASI D-channel
command to VS3000 aaaaaaaa attached to NIC card dd.
The request was rejected.
Couldn't acquire Protocol ID from LSL, Virtual Server
aaaaaaaa/NIC dd!
An attempt was made to send a D-channel message that
was too large to VS3000 aaaaaaaa attached to NIC card
dd. The request was rejected.
Send ASI packet failed to Virtual Server aaaaaaaa via
NIC dd, status <0xhhhhhhhh>!
An ASI D-channel send request to VS3000 aaaaaaaa
attached to NIC card dd was rejected. If hhhhhhhh =
0FFFFF85, the NIC number dd is invalid. No other
statuses are defined.
Transmit complete, but no call entry match for Virtual
Server aaaaaaaa/Port p/Bn!
An ASI B channel send request completed, but no call
was active on VS3000 aaaaaaaa, port p, channel Bn.
Request was rejected.
Received Bn data lost, no call entry match for Virtual
Server aaaaaaaa/Port p!
An ASI B channel message was received, but no call was
active on VS3000 aaaaaaaa, port p, channel Bn. Message
was discarded.
Received Bn data lost from Virtual Server aaaaaaaa/Port
p, application inactive!
An ASI B channel message was received on VS3000
aaaaaaaa, port p, but no application was active and
available for that message. Message was discarded.
Received Bn data from Virtual Server aaaaaaaa/Port p
lost, no ECB slots available for application dd!
An ASI B channel message was received on VS3000
aaaaaaaa, port p, but the receive window on that
particular port was closed. Message was discarded.
Unidentified ASI command <0xhh> received from Virtual
Server aaaaaaaa!
An apparent ASI message was received, but the type
could not be identified. Message was discarded.