Introduction; Product Overview; Features - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

Introduction

Product Overview

The Comtrol™ InterChangeVS™ 3000 virtual remote access server is a
rack-mountable or stackable "network appliance" that connects via
Ethernet to a host Windows NT
terminates four Basic Rate Interface (BRI) ISDN lines. Each ISDN
line ("port") consists of two 64 Kbps B channels and one 16 Kbps D
channel: each B channel can be used independently, for up to eight
simultaneous 64 Kbps connections, or the B channels can be bonded,
for connections of up to 512 Kbps. This bandwidth, along with the
flexible data compression schemes that are supported, makes the
VS3000 ideal for site-to-site file transfers and graphics-intensive
Internet/intranet applications.

Features

• Supports both ISDN Datalink Layer ITU-T Q.921 and ITU-T Q.931 D-
channel signaling.
• Supports both North American (VS3000U) and international
(VS3000S) users with the same product family and software.
• Provides the performance and features of a standalone remote access
server with reduced implementation and operating costs.
• Automatic backup server switching ensures that ISDN services stay
available even if the primary server goes down.
• "Hot-swapping" lets you take VS3000 units in or out of service
without downing the server or interrupting other network services.
• VS-Link software gives you direct and immediate control of the
VS3000, including monitoring and diagnostic functions.
• Full support for Windows NT RAS, Novell NetWare MultiProtocol
Router™, and Novell NetWare Connect™ functionality.
Product Overview
® ®
or Novell NetWare
®
server and
7