Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 43

The list of configured network interfaces is displayed:
4. Select the desired Ethernet board and press Enter.
The binding information window is displayed:
5. Enter the following information:
Status: Enabled
Protocol: CAPI3000
Frame Type: Press Enter to display and select from the list of
available frame types. Select Ethernet_II and press Enter.
6. Press Esc to exit this window. You are asked if you want to save
your changes. Select Yes and press Enter.
The Protocol To Interface/Group Bindings window is displayed.
Configuring NetWare Connect (NWC)
Installing VS-Link (Novell)
43