Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 67

Code
CAPI3000 E025:
CAPI3000 E026:
CAPI3000 E027:
CAPI3000 E028:
CAPI3000 E029:
CAPI3000 E030:
Table 6. CAPI3000 Error Codes
Message and Description
Configuration aaaaaaaa's DNn requires specification of
SPIDn!
Every specified Directory Number requires a
corresponding SPID. Not applicable to EuroISDN
networks.
Configuration aaaaaaaa has no valid SPID/DN pairs, at
least one valid pair required!
Every specified Service Profile ID requires a
corresponding Directory Number, and vice versa. Not
applicable to EuroISDN networks.
Unable to allocate nnnn bytes for default firmware,
Virtual Server aaaaaaaa not loaded!
Unable to allocate enough space for the VS3000 firmware
buffer.
Path pppppppp to Comtrol directory not found, Virtual
Server aaaaaaaa not loaded!
Could not find the Comtrol-unique directory, therefore
unable to load the VS3000 firmware that would be
present in that directory. Fatal, as driver won't default to
standard driver. If the standard driver is acceptable,
reconfigure the VS3000 to remove the optional firmware
file name and restart the server.
Firmware pathname pppppppp not found, Virtual Server
aaaaaaaa not loaded!
Could not find the optional firmware file in the Comtrol-
unique directory, therefore unable to load the VS3000
firmware. Fatal, as driver won't default to standard
driver. If the standard driver is acceptable, reconfigure
the VS3000 to remove the optional firmware file name
and restart the server.
Read error <0xhh> on firmware file bbbbbbbb, Virtual
Server aaaaaaaa not loaded!
The system returned an error while attempting to read
the optional firmware file. Fatal, as driver won't default
to standard driver. If the standard driver is acceptable,
reconfigure the VS3000 to remove the optional firmware
file name and restart the server.
Error Codes and System Messages
67