Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 69

Code
CAPI3000 E038:
CAPI3000 E100:
CAPI3000 E101:
CAPI3000 E102:
CAPI3000 E200:
CAPI3000 E201:
Table 6. CAPI3000 Error Codes
Message and Description
Error allocating ECB pool (nnnn bytes)!
Insufficient space for inbound ECB parking area of nnnn
bytes. This pool is built on an application basis based on
the number of outstanding packets per ISDN channel.
Fatal.
Unable to allocate transmit ECB, status <0xhhhhhhhh>,
NIC dd!
No ECBs were available for issuing a transmit VS3000
control request on NIC card dd. May need to use Novell
system configuration utilities to allocate more ECBs. NIC
driver may be holding on to ECBs too long.
If hhhhhhhh = FFFFFF89, either the packet size
exceeded the maximum ECB size or an ECB was not
available. No other statuses are defined.
Unable to set Protocol ID, status <0xhhhhhhhh>, NIC dd!
The LSLGetPIDFromStackIDBoard system function
returned an error code for NIC card dd while attempting
to determine the stack ID before sending a VS3000
control message.
If hhhhhhhh = 0FFFFF82, either the protocol Stack ID or
the board number does not exist.
If hhhhhhhh = 0FFFFF85, no Protocol ID is associated
with the parameters passed.
No other statuses are defined.
Unable to transmit packet, status <0xhhhhhhh>, NIC dd!
Send of VS3000 control message to NIC card dd failed. If
hhhhhhhh = 0FFFFF85, the NIC number dd is invalid.
No other statuses are defined.
Oversize (dddd) ASI command for Virtual Server
aaaaaaaa!
An attempt was made to send a too-large ASI D-channel
message to VS3000 unit aaaaaa. The size was dddd. The
request was rejected.
Buffers unavailable for sending D channel data to Virtual
Server aaaaaaaa/Port n!
Insufficient system buffers were available to issue a send
request to the D-channel on VS3000 aaaaaaaa Port n.
The request was rejected.
Error Codes and System Messages
69