Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 66

Error Codes and System Messages
Code
CAPI3000 E018:
CAPI3000 E019:
CAPI3000 E020:
CAPI3000 E021:
CAPI3000 E022:
CAPI3000 E023:
CAPI3000 E024:
66
Table 6. CAPI3000 Error Codes
Message and Description
Configuration path pppppppp not found!
Could not retrieve a VS3000 configuration file because
the file at path pppppppp does not exist. Rerun the
configuration utility and save the configuration file.
Read error <0xhh> on configuration file aaaaaaaa!
The system returned an error 0xhh while attempting to
read the specified configuration file.
hh = 01: no such file.
hh = 06: permission denied.
hh = 09: invalid file name.
No other error codes are defined.
Configuration file aaaaaaaa length nnnn, should be
mmmm!
The specified file is either corrupted, not current with the
driver version, or not a configuration file. Rerun VS3000
configuration utility, making sure the configuration
utility version is current with the VS3000 driver version.
Configuration file aaaaaaaa read error, read nnnn of
mmmm bytes!
The specified file read was terminated, since it appeared
that the file would overrun the configuration file buffer.
Configuration file aaaaaaaa in obsolete version nnnn,
should be mmmm!
The specified file is not current with the driver version.
Rerun VS3000 configuration utility, making sure the
configuration utility version is current with the VS3000
driver version.
SPID1 and DN1 are required in configuration aaaaaaaa
for proper operation!
At this time the VS3000 driver requires at least one
SPID/DN pair to be specified, and this pair must be
Service Profile ID 1 / Directory Number 1. Not applicable
to EuroISDN networks.
Configuration aaaaaaaa's SPIDn requires specification of
DNn!
Every specified Service Profile ID requires a
corresponding Directory Number. Not applicable to
EuroISDN networks.