Configuring Protocols - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

Installing VS-Link (Novell)
Note: If the prompt "Synchronize the Inbound Authentication
Database?" appears, select Yes.
8. Repeat steps 2 through 7 for each interface group or interface
name you need to configure.
9. When you are done configuring WAN call destinations, press Esc
to return to the Internetworking Configuration menu.

Configuring Protocols

Follow these steps:
1. Select Protocols from the Internetworking Configuration menu. The
list of supported protocols is displayed:
2. Select CAPI VS3000 and press Enter. The Miscellaneous Protocol
LOAD Commands list is displayed.
3. Press Insert. The Protocol Command Configuration window is
displayed.
4. Enter CAPI3000 as the NLM Name. No parameters are required.
5. Press Esc. You are asked if you want to save your changes. Select
Yes and press Enter. The Miscellaneous Protocol LOAD Commands
list is displayed.
6. Press Esc to return to the Protocol Configuration window.
7. Enable IPX and other protocols as needed.
8. When finished, press Esc to return to the Internetworking
Configuration menu.
28 Configuring MultiProtocol Router (MPR)