Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 71

Code
CAPI3000 E210:
CAPI3000 E211:
CAPI3000 E212:
CAPI3000 E215:
CAPI3000 E216:
CAPI3000 E217:
Table 6. CAPI3000 Error Codes
Message and Description
ASI command_type: Virtual Server aaaaaaaa/Port p/Bn
Invalid PEI <0xhhhh>!
A command_type was received from an application or
CAPI Manager for VS3000 aaaaaaaa, port p, channel Bn,
but no connection had been defined yet for that Program
Entity ID. Message discarded.
Valid command_types:
Connect Request
More Info Indication
Event Indication
Connect Confirmation
Disconnect Confirmation
Disconnect Indication
ASI command_type Cause: Virtual Server aaaaaaaa/Port
p/Bn: Unknown or invalid ASI cause code <0xhh>!
A command_type message related to the specified
channel but containing an unidentified ASI cause code
was received from VS3000 aaaaaaaa, port p, channel Bn.
ASI command_type Cause: Virtual Server aaaaaaaa/Port
p/Bn: ccc...ccc
A command_type message related to VS3000 aaaaaaaa,
port p, channel Bn, occurred because of cause ccc...ccc. For
more information, see the ISDN Cause Codes appendix.
ASI Event Indication: Virtual Server aaaaaaaa/Port p:
Cannot find event type!
An ASI Event Indication was received from VS3000
aaaaaaaa, port p, but no event type could be located
within the message
ASI Connect Indication: Virtual Server aaaaaaaa/Port p:
Duplicate AEI <0xhhhhhhhh>!
An ASI Connect Indication message was received from
VS3000 aaaaaaaa, port p, but a call with the specified
Program Entity ID was already in progress.
ASI Connect Indication: Virtual Server aaaaaaaa/Port p:
Cannot accept new call at this time, disconnecting!
An ASI Connect Indication was received from VS3000
aaaaaaaa, port p, but all possible calls were already in
progress.
Error Codes and System Messages
71