Hardware Specifications And Standards - Comtrol DeviceMaster AIR User Manual

Hardware Specifications and Standards

Hardware Specifications and Standards
58 - DeviceMaster AIR User Guide: 2000365 Rev. C
The following table lists hardware specifications for the DeviceMaster AIR. See
Power Supply Specifications
information.
Item
Current consumption
Power consumption
Processor type
Memory
Serial interface
Serial connector type
Serial baud rate/port (maximum)
NS-Link control:
Data bits
Parity
Stop bits
LAN Ethernet interface
LAN Ethernet network default
values:
IP address
Subnet mask
Gateway
LAN Ethernet network protocols
WLAN Ethernet interface
WLAN Ethernet network default
WLAN Ethernet protocols
WLAN data rates with automatic
fallback
WLAN port encryption
WLAN port media access control
WLAN port frequency range
WLAN port operating range
WLAN port modulation technology
on Page 57 for detailed power supply specification
1.1A @ 5VDC
5.5 W
ARM7
8MB SDRAM/4MB flash
RS-232, RS-422, and RS-485
DB9
230.4 Kbps
7 or 8
Odd, Even, None
1 or 2
10/100 Mbps Fast Ethernet Auto MDI/MDIX
192.168.250.250
255.255.0.0
192.168.250.1
TCP, UDP, BOOTP, TFTP, ICMP, ARP,
SNMP (MIB-II), Telnet, HTTP
10/100 Mbps Fast Ethernet Auto MDI/MDIX
See Factory Default Settings for the WLAN
Port on Page 59.
IEEE 802.11, IEEE 802.11b, IEEE 802.3
Ethernet, IEEE 802.3u
22Mbps, 11Mbps, 5.5Mbps, 2Mbps, 1Mbps
64-bit RC4, 128-bit RC4, 256-bit RC4
CSMA/CA with ACK
2.4 GHz to 2.4385 GHz
Indoors - Up to 328 ft. (100m)
Outdoors - Up to 1,312 ft. (400m)
Environmental factors may adversely affect
range
PBCC - Packet Binary Convolutional Coding
DSSS - Direct Sequence Spread Spectrum
11-chip Barker sequence
Hardware Specifications and Compliance Notices
Specification