Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 72

Error Codes and System Messages
Code
CAPI3000 E218:
CAPI3000 E219:
CAPI3000 E220:
CAPI3000 E221:
CAPI3000 E225:
CAPI3000 E300:
CAPI3000 E301:
72
Table 6. CAPI3000 Error Codes
Message and Description
ASI Connect Indication: Virtual Server aaaaaaaa/Port p:
Unable to locate Block Type!
An ASI Connect Indication was received from VS3000
aaaaaaaa, port p, but no block type could be located
within the message.
ASI Connect Indication: Virtual Server aaaaaaaa/Port p:
Unable to locate Channel Preferences!
An ASI Connect Indication was received from VS3000
aaaaaaaa, port p, but no channel preferences could be
located within the message.
ASI Connect Indication: Virtual Server aaaaaaaa/Port p:
Unsupported call type <0xtt> PEI <0xgggg>
<0xhhhh>
An ASI Connect Indication was received from VS3000
aaaaaaaa, port p, but the specified call type tt was not
identified and could not be supported for Program Entity
ID gggg, Application Entity ID hhhh.
ASI Connect Indication: Virtual Server aaaaaaaa/Port p:
No CAPI Listen received previously PEI <0xgggg> AEI
<0xhhhh>
An ASI Connect Indication was received from VS3000
aaaaaaaa, port p, but the call was rejected since no listen
command had yet been issued for Program Entity ID
gggg, Application Entity ID hhhh.
Virtual Server aaaaaaaa in sss...sss state, unavailable for
output!
An attempt to issue a D-channel output to VS3000
aaaaaaaa was rejected because the VS3000 is currently
in state sss...sss of the VS3000. Message discarded.
Invalid CAPI Request command <0xhh> from Application
ID dd!
A CAPI request was received from the specified
application, but the request code hh could not be
identified. Message discarded.
Invalid CAPI Response command <0xhh> from
Application ID dd!
A CAPI response was received from the specified
application, but the response code hh could not be
identified. Message discarded.
AEI