Returning Control To The Primary Server - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

Server
"A"
Server
"B"
Note: VS-Link for Novell can support four VS3000 units (either
primary, backup, or mixed) per Novell server. VS-Link for
Windows NT can support thirty-two VS3000 units per NT
server.

Returning Control to the Primary Server

When the primary server comes back online after a service outage,
backup-to-primary switching is not automatic. Instead, you must go to
the primary server and perform a manual procedure to reassert
control over the VS3000.
On Windows NT networks, access the ISDN Monitor program and use
the Reset option.
On Novell networks, load the vs3kcfg.nlm utility and use the Primary,
Force Load option.
Backup Server Overview
Primary
Primary
Introduction
VS3000-1
VS3000-2
11