Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 15

The list of Currently Installed Products is displayed.
4. Select CAPI3000 Vx.x Comtrol InterChangeVS 3000.
5. Press the Delete key.
You are asked to verify that you want to delete CAPI3000.
6. Select Yes and press Enter.
A message displays, informing you that CAPI3000 will be removed
from the product database but no files will be removed.
7. Press Enter to continue.
A message displays, informing you that CAPI3000 was removed.
8. Press Enter to continue.
The list of Currently Installed Products is displayed.
9. If you are installing a new version of VS-Link, skip to Installing
VS-Link for Novell, Software Installation subsection, step 4.
If you are not reinstalling VS-Link, press the Esc key until you exit
from the install utility.
10. To unload the module without downing the server, enter:
unload capi3000
Otherwise, down and restart the server to remove the module.
Removing VS-Link for Novell
Installing VS-Link (Novell)
15