Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 76

Table of Contents

Advertisement

Error Codes and System Messages
Code
CAPI3000 E403:
CAPI3000 E404:
CAPI3000 E405:
CAPI3000 E406:
CAPI3000 E500:
CAPI3000 E501:
CAPI3000 E502:
76
Table 6. CAPI3000 Error Codes
Message and Description
Flooding aaaaaa (x ff), dd outstanding B-channel
transmissions!
An excessive number of transmit requests have been
queued for VS3000 aaaaaa. Resource depletion may
occur. ff is the number of times this has occurred.
Application dd unavailable!
An event associated with application dd was queued, but
the application had either never registered or de-
registered. The event is discarded.
Unable to identify and process 'CAPIM' event <0xhh>!
An event associated with CAPI was dequeued but could
not be identified and processed. The event is discarded.
Scheduling failure (reason dd, misc code dd)!
An event could not be signalled (and thereby queued).
The event is discarded.
Binding to Ethernet card failed for stack ID dd, virtual
server ID vv; returned <0xhhhhhhhh>!
The binding of an Ethernet NIC card to the VS3000 ID vv
failed with status hh. The event is discarded.
If status hh = 0x0FFFFF82, the MLID corresponding to
the requested board number or the protocol stack
corresponding to the specified Stack ID does not exist.
If hh = 0x0FFFFF83, the specified binding already exists.
If hh = 0x0FFFFF85, the frame type specified by the
logical board number does not have a PID registered for
this protocol stack.
If hh = 0x0FFFFF89, the LSL has no resources to register
another Protocol ID. No other statuses are defined.
Unbinding from Ethernet card failed for NIC card dd,
returned <0xhhhhhhhh>!
The unbinding of an Ethernet NIC card from the NIC
card dd failed with status hh. The event is discarded. If
hh = 0x0FFFFF82, the NIC board number specified in the
unbind does not exist. If hh = 0x0FFFFF85, there is no
binding between the protocol stack and the NIC board
number specified. No other statuses are defined.
Received message with invalid virtual server ID <0xhh>!
The receive ESR detected an inbound message with an
invalid virtual server ID. The message is discarded.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Interchange vs3000uInterchange vs3000s

Table of Contents