Configuring Protocols - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

8. Select Yes and press Enter.
9. Press Esc twice to return to the NetWare Connect Options menu.
10. Select Exit, or press Esc. You are asked to confirm that you want to
exit NWCCON.
11. Select Yes and press Enter.
You are returned to the system console.

Configuring Protocols

Follow these steps:
1. At the command line prompt, enter:
load inetcfg
The Internetworking Configuration menu is displayed.
2. Select Protocols.
The Protocol Configuration menu is displayed.
3. Select CAPI VS3000.
The Miscellaneous Protocol LOAD Commands list is displayed.
4. Press Insert.
The Protocol Command Configuration window is displayed.
5. Enter CAPI3000 for NLM Name. No parameters are required.
6. Press Esc. You are asked if you want to save your changes. Select
Yes and press Enter.
The Miscellaneous Protocol LOAD Commands list is displayed.
7. Press Esc to return to the Protocol Configuration window.
8. Press Esc to return to the Internetworking Configuration menu.
Configuring NetWare Connect (NWC)
Installing VS-Link (Novell)
41