Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 35

The list of available drivers is displayed:
6. Scroll down the list until WHSMCAPI is displayed, or begin
typing in WHSMCAPI and let the system find it. Highlight
WHSMCAPI (if needed) and press Enter.
You are prompted to enter a board name.
7. Enter a unique name to identify the VS3000 unit and press Enter.
The WHSMCAPI Board Configuration window is displayed:
8. Select CAPI Board Options and press Enter.
You are asked if INETCFG should automatically load the CAPI
driver.
9. Select Yes and press Enter.
The list of available CAPI drivers is displayed.
10. Select CAPI3000 and press Enter.
Configuring NetWare Connect (NWC)
Installing VS-Link (Novell)
35