Comtrol InterChange VS 3000 Series Installation And Configuration Manual page 83

Table 7. CAPI3000 Informational Codes
Code
CAPI3000 I201:
CAPI3000 I202:
CAPI3000 I203:
Message and Description
ASI cmd_type Display: Virtual Server aaaaaaaa/Port
p/Bn: sss...ssss.
The above console output is generated when the
operator selects the VS3000 configuration utility
diagnostic option for Event Logging, a Display
ASN1.1 element is received as part of an ASI D-
channel message, and an active call entry exists for
the VS3000 aaaaaaaa, port p, channel Bn, specified
in the ASI message.
Valid cmd_types:
More Info Indication
Event Indication
Connect Indication
Error Indication
Connect Indication
Disconnect Confirmation
Disconnect Indication
ASI cmd_type Display: Virtual Server aaaaaaaa:
sss...sss.
The above console output is generated when the
operator selects the VS3000 configuration utility
diagnostic option for Event Logging, a Display
ASN1.1 element is received as part of an ASI D-
channel message, and no active call entry exists for
the channel, port, and VS3000 specified in the ASI
message received.
Valid cmd_types:
More Info Indication
Event Indication
Connect Indication
Error Indication
Connect Indication
Disconnect Confirmation
Disconnect Indication
ASI Channel Preference: Virtual Server aaaaaaaa/
Port p: No channel selected, assigned channel 'B1'.
The above console output is generated when the
operator selects the VS3000 configuration utility
diagnostic option for Event Logging and no channel
preference is declared in either an Nb_MORE_INFO
Indicate, Nb_EVENT Indicate, or an Nb_CONNECT
Indicate from VS3000 aaaaaaaa, port p. Channel B1
was arbitrarily assigned. Central Office channel
selection process normally forestalls this operation.
Error Codes and System Messages
83