Socket Port Configuration; Socketserver Overview; Web Page Help System - Comtrol DeviceMaster LT User Manual

SocketServer Overview

Web Page Help
System
DeviceMaster LT User Guide: 2000586 Rev. B

Socket Port Configuration

This section provides an overview of SocketServer and provides basic operating
procedures. SocketServer and DeviceMaster LT security are discussed in detail in
DeviceMaster LT Security
Note: Technical Supports recommends that you update to the latest version of
SocketServer before installing an NS-Link device driver or configuring
socket ports.
SocketServer is the name of the TCP/IP socket web page that is integrated in the
firmware that comes pre-installed on your DeviceMaster LT. When you install an
NS-Link device driver, an NS-Link version of SocketServer loads on the
DeviceMaster LT.
The SocketServer home page (Server Status) provides access to configure.
• Socket port characteristics for:
- Serial
- TCP connection
- UDP connection
See SocketServer Architecture
port support.
• Network settings (after initial configuration)
• Security, which is discussed in detail starting on Page 45
• Email notification services
• RFC1006 (ISO over TCP)
Note: For socket service configuration procedures or detailed information each
field, see the web page Help system.
The web page Help system is available separately for your convenience. The web
page Help system contains detailed information and configuration procedures for
each mode discussed in
The Help system for the web page is available on the CD on the Supporting
Documents page for your DeviceMaster LT or you can download the latest version
from: ftp://ftp.comtrol.com/dev_mstr/LT/software/socketserver/help/ssvr_help.zip.
To use the help system:
1. Unzip the files in a folder.
2. Open the ssvr_help.htm file.
3. Use your browser find function to locate the option or information for which
are searching.
on Page 45.
on Page 42 for more information about socket
SocketServer Architecture on Page 42.
Socket Port Configuration - 41