Model Cse311, Cse313 And Cse323 Embedded Cpu Baseplates - GE 90-30 PLC Series Installation And Hardware Manual

Model CSE311, CSE313 and CSE323 Embedded CPU Baseplates

The Programmable Logic Controller with a built-in State Logic CPU is available in three models.
The CSE3
built-in CPU has 0 slots available for modules. Each baseplate also has a power supply slot.
The CSE 3 , 3 3 and 323 CPUs can be programmed in the State Logic programming language
using the State Logic software products. The State logic software products are also used to
configure the Programmable Controller and communicate on-line with the State Logic CPU for
debugging and troubleshooting operations.
The CSE3 , CSE3 3, and CSE323 communicate with I/O modules, smart option modules, and
Third Party modules across the PLC backplane. Most of the available Series 90-30 discrete,
analog, and special purpose modules are supported (with Release 3.0 of State Logic). Foreign or
3rd party modules are also supported.
A socket labeled PROGRAM PROM is provided to install an EEPROM or EPROM. This option
allows the control program to be stored in a PROM instead of RAM memory. It also is convenient
in that it allows the PROM to be copied for installation in multiple CPUs.
Figure 9-5. Model CSE311 or CSE313 5-Slot Embedded CPU Baseplate
PROGRAMMABLE
CONTROLLER
CAUTION
SYSTEM
PROM
USER PROGRAM
AND REGISTER
VALUES MAY BE
LOST IF POWER
SUPPLY IS
REMOVED FOR
LONGER THAN
1 HOUR.
POWER
SUPPLY
Figure 9-6. Model CSE323 10-Slot Embedded CPU Baseplate
GFK-0356Q Chapter 9 State Logic Products
and CSE3 3 with built-in CPU has 5 slots available for modules and the CSE323 with
PROGRAMMABLE
CONTROLLER
CAUTION
USER PROGRAM
AND REGISTER
VALUES MAY BE
LOST IF POWER
SUPPLY IS
REMOVED FOR
LONGER THAN
i HOUR
POWER
SUPPLY
PROGRAM
PROM
1
2 3
1
SYSTEM PROGRAM
PROM PROM
1
2 3
4 5 6
4 5
7 8 9
9
10
9-9