GE 90-30 PLC Series Installation And Hardware Manual page 174

7
IC693DVM300 Digital Valve Driver Module
This 4-channel digital valve driver module is capable of driving loads of up to .6 Amps at 24
VDC. Although it mounts in a standard Series 90-30 PLC slot, it does not connect to the PLC
backplane. Its control power and output power come from an external supply. (The GE
IC690PWR 24 stand-alone power supply would be a suitable choice.) This module is designed for
TTL (5 VDC) inputs.
Figure 7-6. IC693DVM300 Digital Valve Driver Module
Indicator LEDs
7-12 Series 90-30 PLC Installation and Hardware Manual – August 2002
DIG CH: 1
2
PWR
DIG CH: 1 – 4: These light when their corresponding input is at a Logic level.
PWR: Lights to indicate the presence of +26 VDC (nominal) input power on terminals
and 2.
3
4
OUTPUT
28V 1.6A max.
1
+28V.IN
2 +28V.RET
3 AUX.OUT.+15
4
AUX.OUT.-15
5
DIGITAL.1.IN
6
DIGITAL.2.IN
7 DIGITAL.3.IN
8 DIGITAL.4.IN
9
DIGITAL.RET
10
+28V1.IN
11
+28V2.IN
12
28V1&2.RET
13 VALVE.1.OUT
14
VALVE.1.RET
15
VALVE.2.OUT
16
VALVE.2.RET
17 VALVE.3.OUT
18 VALVE.3.RET
19 VALVE.4.OUT
20 VALVE.4.RET
GFK-0356Q