GE 90-30 PLC Series Installation And Hardware Manual page 242

IC693CBL305
IC693CBL306
IC693CBL307
IC693CBL308
IC693CBL309
IC693CBL310
(Obsolete. Use
IC693CBL327 and
IC693CBL328)
IC693CBL311
IC693CBL312
IC693CBL313
GFK-0356Q Chapter 10 Cables
Series 90-30 Cable Cross-Reference
Catalog No.
Wye cable for splitting out two serial
port connections from one module
connector. (Use cable IC693CBL304
with the IC693PCM300 module.)
3' (1 meter) extension cable connects
between the 50-pin connector on the
module faceplate and the connector on
the terminal block.
6' (2 meter) extension cable connects
between the 50-pin connector on the
module faceplate and the connector on
the terminal block.
3' (1 meter) I/O cable connects to the
50-pin connector on the module
faceplate. The other end has stripped,
tinned, and labeled leads.
6' (2 meter) I/O cable connects to the
50-pin connector on the module
faceplate. The other end has stripped,
tinned, and labeled leads.
10' (3 meter) I/O cable connects to one
of the 24-pin connectors on the module.
The other end has stripped, tinned, and
labeled leads.
Two cables are required per module.
10' (3 meter) APM I/O cable connects
between one of the 24-pin connectors on
the module and the connector on the
terminal block.
Two cables are required per module.
0.5' (152 mm) I/O expansion cable
interconnects baseplate expansion ports.
This is a Wye type cable for daisy-
chaining baseplates.
26' (8 meter) I/O expansion cable
interconnects baseplate expansion ports.
This is a Wye type cable for daisy-
chaining baseplates.
Description
For use with the following modules:
IC693PCM301
IC693PCM311
IC693CMM311
IC693ADC311
AD693CMM301
IC693SLP300
For High Density (32-point) I/O
modules having a single 50-pin
connector:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
For High Density (32-point) I/O
modules having a single 50-pin
connector:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
For High Density (32-point) I/O
modules having a single 50-pin
connector:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
For High Density (32-point) I/O
modules having a single 50-pin
connector:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
For High Density (32-point) I/O
modules having dual 24-pin connectors:
IC693MDL654
IC693MDL655
IC693MDL752
IC693MDL753
APM modules:
IC693APU301
IC693APU302
To interconnect CPU, expansion, and
remote baseplates.
To interconnect CPU, expansion, and
remote baseplates.
10
Cables
Applications
10-3