Ic693Cbl310 I/O Interface Cable (24-Pin) For 32 Point Modules; Function Of Cable - GE 90-30 PLC Series Installation And Hardware Manual

10
IC693CBL310
I/O Interface Cable (24-Pin) for 32 Point Modules

Function of cable

This 10' (3 meter) prewired cable was used with all Series 90-30 high-density (32 point) I/O
modules that use the Fujitsu 24-pin user I/O connector. Each of these modules has two of these
connectors mounted side-by-side. I/O Interface cables have a 24-pin female connector on one end
for connection to the module, and stripped and tinned wires on the other end. Catalog numbers for
32 point modules having two 24-pin connectors are: IC693MDL654, IC693MDL655,
IC693MDL752, and IC693MDL753.
Connections to module input circuits are made from the user's input devices to two male (pin-type)
24-pin connectors (Fujitsu FCN-365P024-AU) mounted on the front of the module. The
connector mounted on the right of the module (front view) interfaces with groups A and B; the
connector on the left side of the module interfaces with groups C and D. If a different length cable
is required for connections to these modules, you can build your own cable (information on
building your own cable is found in the data sheet for cable IC693CBL315).
Figure 10-28. IC693CBL310 Cable
10-42 Series 90-30 PLC Installation and Hardware Manual – August 2002
This cable is obsolete. Please use IC693CBL327 and IC693CBL328.
Note:
See the data sheet for these cables for details. The replacement cables
have right-angle connectors to reduce the clearance space required in
front of the PLC.
Length = 10' (3 meters)
Connector: Fujitsu FCN–365S024–AU
GFK-0356Q
B1 A1
B12 A12