Cpu363; Catalog Number Ic693Cpu363 - GE 90-30 PLC Series Installation And Hardware Manual

5

CPU363

CPU Type
Total Baseplates per System
Load Required from Power Supply
Processor Speed
Processor Type
Operating Temperature
Typical Scan Rate
User Memory (total)
Discrete Input Points - %I
Discrete Output Points - %Q
Discrete Global Memory - %G
Internal Coils - %M
Output (Temporary) Coils - %T
System Status References - %S
Register Memory - %R
Analog Inputs - %AI
Analog Outputs - %AQ
System Registers (
for reference table viewing only;
cannot be referenced in user logic program)
Timers/Counters
Shift Registers
Built-in Ports
Communications
Override
Battery Backed Clock
Interrupt Support
Type of Memory Storage
PCM/CCM Compatibility
Floating Point Mat h Support
5-38 Series 90-30 PLC Installation and Hardware Manual – August 2002

Catalog Number IC693CPU363

Single slot CPU module
8
(CPU baseplate + 7 expansion and/or remote)
890 milliamps from +5 VDC supply
25 MegaHertz
80386EX
0 to 60 degrees C (32 to 140 degrees F) ambient
0.22 milliseconds per 1K of logic (boolean contacts)
240K (245,760) Bytes. Actual size of available user
program memory depends on the amounts configured for
%R, %AI, and %AQ configurable word memory types
(see below).
2,048
2,048
1,280 bits
4,096 bits
256 bits
128 bits (%S, %SA, %SB, %SC - 32 bits each)
Configurable in 128 word increments from 128 to 16,384
words with Logicmaster and from 128 to 32,640 words
with Control version 2.2.
Configurable in 128 word increments from 128 to 16,384
words with Logicmaster and from 128 to 32,640 words
with Control version 2.2.
Configurable in 128 word increments from 128 to 16,384
words with Logicmaster and from 128 to 32,640 words
with Control version 2.2.
28 words (%SR)
>2,000
Yes
Three ports. Supports SNP/SNPX slave (on power
supply connector). On Ports 1 and 2, supports
SNP/SNPX master/slave and RTU slave. Requires CMM
module for CCM; PCM module for RTU master support.
LAN - Supports multidrop. Also supports Ethernet, FIP,
Profibus, GBC, GCM, GCM+ option modules.
Yes
Yes
Supports the periodic subroutine feature.
RAM and Flash
Yes
Yes, firmware-based in firmware Release 9.0 and later.
PS
P1 PORT
P2
CPU 363
ON
OFF
PORT 1
RS-232
PORT 2
RS-485
FRAME
GFK-0356Q