Dc Input Only Power Supplies; Ic693Pwr322 Standard Power Supply, 24/48 Vdc Input - GE 90-30 PLC Series Installation And Hardware Manual

DC Input Only Power Supplies

IC693PWR322 Standard Power Supply, 24/48 VDC Input

The IC693PWR322 is a 30 watt output power supply designed for 24 VDC or 48 VDC nominal
inputs. It will accept an input voltage range from 8 VDC to 56 VDC. Although it is capable of
maintaining all outputs within specifications with input voltages as low as 8 VDC, it will not start
with initial input voltages of less than 2 VDC. This power supply provides the following outputs:
The load capacity for each output of this power supply is shown in the following table.
Table 4-6. IC693PWR322 Power Supply Capacities
Number
IC693PWR322
* Total of all outputs combined cannot exceed 30 watts.
Figure 4-4. Series 90-30 24/48 VDC Input Power Supply - IC693PWR322
GFK-0356Q Chapter 4 Power Supplies
+5 VDC output.
+24 VDC Relay power output which provides power to circuits on Series 90-30 Output Relay
modules.
Isolated +24VDC, which is used internally by some modules, can also be used to provide
external power for 24VDC Input modules.
Catalog Load
Capacity
30 Watts 24 or 48 VDC
IC693PWR322
PROGRAMMABLE
CONTROLLER
CONNECTIONS
FOR
DC POWER
SOURCE
INTERNAL POWER
SOURCE FOR
MODULES REQUIRING
24VDC
Input Output Capacities (Voltage/Power *)
+5 VDC +24 VDC Isolated 20
5 watts watts
Series 90-30
STANDARD
POWER SUPPLY
PROGRAMMABLE CONTROLLER
+
INPUT
24/48 VDC
50 WATT
+
24 VDC
OUTPUT
0.8A MAX.
B
A
T
T
E
R
LITHIUM
Y
BACK-UP
BATTERY
+24 VDC Relay 5
watts
PWR
SYSTEM
OK
STATUS
RUN INDICATORS
BATT
RS-485
COMPATIBLE
SERIAL PORT
BATTERY
CONNECTORS
4
4-7