GE 90-30 PLC Series Installation And Hardware Manual page 274

IC693CBL304/305
Port Expansion (WYE) Cables for PCM, ADC, and CMM
Function of cable
A WYE cable (IC693CBL304 for PCM300; IC693CBL305 for PCM301/311, ADC311, CMM311,
AD693CMM301, and SLP300) is supplied with each PCM, ADC, and CMM module. The WYE
cable is used to separate two ports available on a single physical connector; the cable separates the
RS-232 from the RS-485 signals. In addition, the WYE cable allows cables used with the Series
90-70 PCM to be fully compatible with the Series 90-30 PCM. The WYE cable and cable
connections are shown below and on the following page.
Each WYE cable is 1 foot in length and has a right angle male connector on one end that connects
to the PCM module. The other end has a dual female connector with one connector for port 1 and
the other for port 2.
Figure 10-25. Wye Cable
Cable Specifications
Cable Length
25 Pin Male Connector:
25 Pin Female Connector:
Connector Shell:
Cable Type
GFK-0356Q Chapter 10 Cables
RS-232
PIN 1
25-PIN MALE
CONNECTOR
1 foot (0.3 meters)
Crimp Plug = Amp 207464-1; Pin = Amp 66506-9
Solder Plug = Amp 747912-2
Crimp Receptacle = Amp 207463-2; Pin = Amp 66504-9
Solder Receptacle = Amp 747913-2
Kit - Amp 207908-7
Separate Shell = Amp 207345-1;
Male Screw Retainer = Amp 205980-1
27 conductor cable, 28 AWG (.09 mm
flexible
1 FOOT
(+2.0 INCH, -0 INCH)
LABEL
PCM COMM. CABLE
IC693CBL305
Cables
RS-232
25-PIN FEMALE
CONNECTOR
PIN 1
PORT 1
PORT 2
RS-232/RS-485
PIN 1
25-PIN FEMALE
CONNECTOR
2
), with overall shield, extra
10-35
10