Ic640Wmi310/320 Work Station Interface Boards - GE 90-30 PLC Series Installation And Hardware Manual

11

IC640WMI310/320 Work Station Interface Boards

The Work Station Interface (WSI) board provides an RS-485 serial interface between a Series 90-
30 PLC and a PC-compatible programmer running Logicmaster 90-30/20/Micro software. This
board is available in two versions.
The WSI board can be ordered as part of a package with Logicmaster 90-30/20/Micro
programming software. When a Workmaster II computer was ordered as the programming device,
the WSI board was installed at the factory. The WSI resides in a full length computer slot. The
computer can be a Workmaster, Workmaster II, Cimstar industrial computer, or a PC-compatible
personal computer.
Figure 11-1. WSI Board for the Workmaster II Computer
Figure 11-2. Location of WSI in a Series II 90-30 PLC System
11-2 Series 90-30 PLC Installation and Hardware Manual – August 2002
IC640WMI310 (serial operation only) for Workmaster or IBM PC XT or AT or compatible
personal computers.
IC647WMI320 (serial operation only) for Workmaster II or IBM PS/2 or compatible personal
computers.
SERIAL OPERATION ONLY
WSI
SERIAL
PROGRAMMER
a44734
IC647WMI320
SERIES 90-30
SERIAL
CABLE
GFK-0356Q