GE 90-30 PLC Series Installation And Hardware Manual page 407

H
Step 3: Snap I/O Face Plate assembly on module
Step 4: Connect cable to connector on terminal block
Finally, connect the selected length cable from the connector on the I/O Face Plate to the connector
on the interposing terminal block.
Module Wiring Information
Refer to GFK-0898, Series 90-30 PLC I/O Module Specifications Manual for wiring connections
for each module.
Cable Information
Data sheets for the cables are found in the "Cables" chapter of this manual.
H-4 Series 90-30 PLC Installation and Hardware Manual – August 2002
A1 2 3 4 5 6 7 8
F
B1 2 3 4 5 6 7 8
Installing the I/O Face Plate
A1 2 3 4 5 6 7 8
F
B1 2 3 4 5 6 7 8
Module with I/O Face Plate Installed
GFK-0356Q
a47118