Ic693Cbl315 I/O Interface Cable (24-Pin) For 32 Point Modules; Function Of Cable; Building Custom Length Cables For 24-Pin Connectors - GE 90-30 PLC Series Installation And Hardware Manual

IC693CBL315
I/O Interface Cable (24-Pin) for 32 Point Modules

Function of cable

This prewired cable is available for use with all Series 90-30 high-density (32 point) I/O modules
that use the Fujitsu 24-pin user I/O connector. Each of these modules has two of these connectors
mounted side-by-side. I/O Interface cables have a 24-pin connector on one end for connection to
the module, and stripped and tinned wires on the other end. Catalog numbers for 32 point modules
having two 24-pin connectors are: IC693MDL654, IC693MDL655, IC693MDL752, and
IC693MDL753.
Connections to input circuits are made from the user's input devices to two male (pin-type) 24-pin
connectors (Fujitsu FCN-365P024-AU) mounted on the front of the module. The connector
mounted on the right of the module (front view) interfaces with groups A and B; the connector on
the left side of the module interfaces with groups C and D. If a different length cable is required
for connections to these modules, you can build your own cable.
Figure 10-31. IC693CBL315 Cable

Building Custom Length Cables for 24-Pin Connectors

Cables connecting the module to field devices can be built to length as required for individual
applications. You must purchase the mating female (socket type) 24-pin connectors. The 24-pin
connector kit can be ordered as an accessory kit from GE . Catalog numbers for these
connectors and their associated parts are listed in the following table. The list includes catalog
numbers for three types of connectors: solder pin, crimp pin, and ribbon cable. Each accessory kit
contains enough components (D-connectors, backshells, contact pins, etc.) to assemble ten single-
ended cables of the type specified for each kit.
GFK-0356Q Chapter 10 Cables
This cable became obsolete in late 1998. It was replaced by two cables:
Note:
IC693CBL327 and IC693CBL328. See the data sheet for these cables
for details. The replacement cables have right-angle connectors to
reduce the clearance space required in front of the PLC.
Length = 10' (3 meters)
Cables
Connector: Fujitsu FCN–365S024–AU
10
B1 A1
B12 A12
10-49