Using A Generic Terminal Block Or Strip; Direct Method; Installation Of Discrete 32-Point, Dual 24-Pin Connector Modules; Using A Tbqc - GE 90-30 PLC Series Installation And Hardware Manual

2

Using a Generic Terminal Block or Strip

Direct Method

Installation of Discrete 32-Point, Dual 24-Pin Connector Modules

Using a TBQC

The Terminal Block Quick Connect (TBQC) Assembly is an option for certain Series 90-30
discrete I/O modules. See Appendix H for more information.

With a Generic Terminal Block/Strip

2-20 Series 90-30 PLC Installation and Hardware Manual – August 2002
Mount terminal block/strip to the enclosure panel.
Connect an IC693CBL308 or 309 cable, or a custom made cable, to the module's faceplate
connector and wire the stripped ends of the cable to the terminal block/strip. See Chapter 10
for cable data.
Wire I/O devices to the terminal block/strip.
Connect an IC693CBL308 or 309 cable, or a custom made cable, to the module's faceplate
connector and wire the stripped ends of the cable directly to the field devices. See Chapter 10
for cable data. See the Series 90-30 PLC I/O Module Specifications Manual, GFK-0898, for
pin-out information.
Mount two TBQC terminal blocks. Each has a 24-pin connector and a terminal strip, and
mounts on a standard 35 mm DIN-rail.
Connect a pair of TBQC cables (IC693CBL329 - 334) between the module's faceplate
connector and the connectors on the two TBQC terminal blocks. Note that both a right side
and left side cable is required. See Appendix H for a list of cables.
Wire I/O devices to the terminal blocks. See the Series 90-30 PLC I/O Module Specifications
Manual, GFK-0898, for pin-out information.
Mount terminal block/strip to the enclosure panel.
Connect an IC693CBL327/328 cables, or a custom made cables, to the module's faceplate
connectors, and wire the stripped ends of the cables to the terminal block/strip. Note that both
a right side and left side cable is required. See Appendix H for a list of cables. See Chapter 10
for cable data sheets.
Wire I/O devices to the terminal block/strip. See the Series 90-30 PLC I/O Module
Specifications Manual, GFK-0898, for pin-out information.
GFK-0356Q