GE 90-30 PLC Series Installation And Hardware Manual page 342

Spare/Replacement Parts
Two kits (IC693ACC319 and IC693ACC320) provide mechanical spare parts for Series 90-30
modules. One covers I/O CPU, PCM, and other modules; the other is for power supply modules.
These kits provide parts such as module levers, front covers, cases, etc. The following table
describes the contents of each kit.
Table 13-2. Spare/Replacement Parts
GFK-0356Q Chapter 13 Maintenance and Troubleshooting
Spare Parts
IC693ACC319:
Spare parts kit for I/O, CPU,
and PCM modules
IC693ACC320:
Spare parts kit for power
supplies
IC693ACC301 (see Note)
Memory Backup Battery
Fuses
Modules
IC693ACC311
Removable Module Terminal
Board
44A736756-G01
CPU (CPU350 – 364) Key Kit
Note: The IC693ACC301 batteries have a shelf life of 5 years (see Chapter 6 for instructions on how to read battery
date codes). Periodically, outdated batteries should be removed from stock and disposed of according to the battery
manufacturer's recommendations.
Maintenance and Troubleshooting
Contents
(qty. 10) I/O, CPU, PCM case lever
(qty. 10) Spring pins cap
(qty. 2) PCM module front cover
(qty. 2) PCM lens cap
(qty. 2) CPU module case
(qty. 2) Power supply lever
(qty. 2) Spring pin for power supply lever
(qty. 2) Spring for power supply lever
(qty. 2) Power supply lens cap
(qty. 2) Power supply terminal cover
(qty. 2) Memory backup battery for CPU and PCM modules
See "Fuse List For Series 90-30 Modules" table in this chapter.
You may wish to maintain spare PLC modules. Many systems
have more than one of a particular catalog number, such as
power supplies (each rack has one) and I/O modules. In these
cases, one of each type would serve as backups for several
modules.
(qty. 6) Removable terminal boards used on many I/O
modules and some Option modules.
Kit contains three sets (6 keys). Same key fits all applicable
CPUs.
13
13-7