GE 90-30 PLC Series Installation And Hardware Manual page 7

This manual describes the GE Series 90-30 Programmable Logic Controller (PLC). It
contains a description of hardware components and provides basic hardware installation
procedures. The Series 90-30 PLC is a member of the Series 90_ family of Programmable Logic
Controllers from GE.
For a list of product standards, refer to data sheet GFK-0867B or later, GE Approvals,
Standards, General Specifications which lists all of the standards for GE products.
Installation instructions in this manual are provided for installations that do not require special
procedures for noisy or hazardous environments. For installations that must conform to more
stringent requirements (such as CE Mark), see GFK-1179, Installation Requirements for
Conformance to Standards.
What's New in This Manual
Related Publications
For more information on Series 90-30 products, refer to these publications. (For a publication to
product catalog number cross-reference refer to Appendix G):
GFK-0255 - Series 90 PCM and Support Software User's Manual
GFK-0256 - MegaBasic Programming Reference Manual
GFK-0293 - Series 90 -30 High Speed Counter User's Manual
GFK-0401 - Workmaster® II PLC Programming Unit Guide to Operation
GFK-0402 - Series 90 -30 and 90-20 PLC Hand-Held Programmer User's Manual
GFK-0412 - Genius® Communications Module User's Manual
GFK-0466 - Logicmaster 90 Series 90 -30/20/Micro Programming Software User's Manual
GFK-0467 - Series 90 -30/20/Micro Programmable Controllers Reference Manual
GFK-0487 - Series 90 PCM Development Software (PCOP) User's Manual
GFK-0499 - CIMPLICITY® 90-ADS Alphanumeric Display System User's Manual
GFK-0356Q
Added the model 374 CPU, which supports connection to an Ethernet network through two
built-in 10BaseT/100BaseTx auto-negotiating full-duplex Ethernet ports. Models 364 (release
9.10 and later) and 374 are the only Series 90-30 CPUs that support Ethernet Global Data.
Note that the CPU374 is supported only by the Windows®-based programmers.
Other corrections and clarifications as necessary.
Preface
vii