Replacement/Obsolescence Information; Connector Depth For Cable Ic693Cbl310 - GE 90-30 PLC Series Installation And Hardware Manual

Table 10-4. Wire List for 24-Pin Connectors
Pin Number
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12

Replacement/Obsolescence Information

Connector Depth for Cable IC693CBL310

The following illustration shows the space required in front of the PLC when this cable is
connected to a module. The depth of the cabinet that the PLC is mounted in should allow for the
depth added by this connector.
GFK-0356Q Chapter 10 Cables
Pair # Wire Color Code
1 BLACK
1 WHITE
2 BROWN
2 WHITE
3 RED
3 WHITE
4 ORANGE
4 WHITE
5 YELLOW
5 WHITE
6 GREEN
6 WHITE
B ROW
A ROW
Each pair of wires should be tied together with heat
h i k
tubing for identification purposes. For example, a
piece of heat shrink tubing should be placed around the h t
BLACK and WHITE wire pair (Pair #1) that connect to
Pins A1 and A2, etc.
This cable became obsolete and was replaced by cable IC693CBL315 (now obsolete also).
The only difference between these two cables is in the wire color coding.
When cable IC693CBL315 became obsolete, the replacement for these cables became
IC693CBL327 and IC693CBL328. Cables IC693CBL310/315 have straight connectors.
Cables IC693CBL327/328 have right angle connectors. The right angle connectors require
less depth in front of the PLC, so allow the use of a smaller enclosure in some applications.
Data sheets for cables IC693CBL315 and IC693CBL327/328 can be found in this chapter.
Pin Number Pair #
B1 7
B2 7
B3 8
B4 8
B5 9
B6 9
B7 10
B8 10
B9 11
B10 11
B11 12
B12 12
12 3 2 1
12 3 2 1
NOTE
Cables
Wire Color Code
BLUE
WHITE
VIOLET
WHITE
GRAY
WHITE
BROWN
BLACK
RED
BLACK
ORANGE
BLACK
CONNECTOR
10-43
10