Connector Depth - GE 90-30 PLC Series Installation And Hardware Manual

Table 10-12. TBQC Cable Cross-Reference Table
IC693CBL329
IC693CBL330
IC693CBL331
IC693CBL332
IC693CBL333
IC693CBL334
IC693CBK002
IC693CBK003
IC693CBK004

Connector Depth

The following figure shows that the cable connectors extend 2" out from the face of the Series 90-
30 modules they are connected to. The depth of the cabinet that the PLC is mounted in should
allow for the 2" depth added by this connector.
Figure 10-41. Dimension for Depth of Connector
GFK-0356Q Chapter 10 Cables
Cable Catalog
Number
Dual 24-pin, 90 deg. connectors, Left Side
Cable length = 1.0 Meter
Dual 24-pin, 90 deg. connectors, Right Side
Cable length = 1.0 Meter
Dual 24-pin, 90 deg. connectors, Left Side
Cable length = 2.0 Meters
Dual 24-pin, 90 deg. connectors, Right Side
Cable length = 2.0 Meters
Dual 24-pin, 90 deg. connectors, Left Side
Cable length = 0.5 Meter
Dual 24-pin, 90 deg. connectors, Right Side
Cable length = 0.5 Meter
Cable Kit. Includes both the IC693CBL329 (left side) and IC693CBL330 (right
side) cables
Cable Kit. Includes both the IC693CBL331 (left side) and IC693CBL332 (right
side) cables
Cable Kit. Includes both the IC693CBL333 (left side) and IC693CBL334 (right
side) cables
2.0"
Cable Description
and Length
Cable Kits
Series 90-30
I/O Module
10
Cables
Replaces Obsolete
Cable Number
IC693CBL321
IC693CBL321
IC693CBL322
IC693CBL322
IC693CBL323
IC693CBL323
10-63