GE 90-30 PLC Series Installation And Hardware Manual page 243

10
IC693CBL314
Note:
This cable is identical
to cable
IC693CBL302
IC693CBL315
(Obsolete. Use
IC693CBL327 and
IC693CBL328)
IC693CBL316
IC693CBL317
IC693CBL318
IC693CBL319
IC693CBL320
IC693CBL321
(Obsolete. Use
IC693CBL329 and
IC693CBL330)
IC693CBL322
(Obsolete. Use
IC693CBL331 and
IC693CBL332)
10-4 Series 90-30 PLC Installation and Hardware Manual – August 2002
Series 90-30 Cable Cross-Reference
Catalog No.
50' (15 meter) I/O expansion cable
interconnects baseplate expansion ports.
This is a special type with built-in
termination resistors. It is not a Wye
type cable – it is for use as the last cable
on the link.
10' (3 meter) I/O cable connects to one
of the 24-pin connectors on the module.
The other end has stripped, tinned, and
labeled leads.
Two cables are required per module.
3' (1 meter) serial cable with 9-pin D-
shell connector that connects to a
Personal Computer's serial port. The
other end has an RJ-11 connector.
Special 10' (3 meter) APM I/O cable
connects between one of the 24-pin
connectors on the module and the
connector on the terminal block. This
cable is similar to IC693CBL311 except
that its drain shield wire is brought
outside of the connector.
Two cables are required per module.
Unused or inactive number
3' (1 meter) APM I/O cable connects
between one of the 24-pin connectors on
the module and the connector on the
terminal block.
Two cables are required per module.
Special 3' (1 meter) APM I/O cable
connects between one of the 24-pin
connectors on the module and the
connector on the terminal block. This
cable is similar to IC693CBL319 except
that its drain shield wire is brought
outside of the connector.
Two cables are required per module.
3' (1 meter) I/O cable connects between
a 24-pin connector on the module and
the connector on the terminal block.
6' (2 meter) I/O cable connects between
a 24-pin connector on the module and
the connector on the terminal block.
Description
To interconnect CPU, expansion, and
remote baseplates.
For High Density (32-point) I/O
modules having dual 24-pin connectors:
IC693MDL654
IC693MDL655
IC693MDL752
IC693MDL753
For connecting to modules with an RJ-
11 communications port:
IC693CMM321
IC693CPU351, 352, 363
IC693DSM302, 314
APM modules:
IC693APU301
IC693APU302s
APM modules:
IC693APU301
IC693APU302
APM modules:
IC693APU301
IC693APU302
Used with the Terminal Block Quick
Connect assemblies. See Appendix H
for a module list and cable selection
information.
Used with the Terminal Block Quick
Connect assemblies. See Appendix H
for a module list and cable selection
information.
Applications
GFK-0356Q