Cpu374; Catalog Number Ic693Cpu374 - GE 90-30 PLC Series Installation And Hardware Manual

5

CPU374

CPU type
Processor speed
Processor Type
Typical Scan Rate
Type of Memory Storage
User Memory (total)
Discrete Input Points - %I
Discrete Output Points - %Q
Discrete Global Memory - %G
Internal Coils - %M
Output (Temporary) Coils - %T
System Status References - %S
Register Memory - %R
Analog Inputs - %AI
Analog Outputs - %AQ
System Registers - %SR
Timers/Counters
Battery Backed Clock
Battery Back Up (Number of months
with no power)
Load Required from Power Supply
EZ Program Store Device
Total Baseplates per System
Interrupt Support
Communications and Programmable
Coprocessor Compatibility
Override
Floating Point Math
Programming Support
Built-in Serial Ports
Protocol Support
Built-in Ethernet Communications
Number of Ethernet Ports
Number of IP Addresses
Protocols
Web Server Support
Operating Temperature
Storage Temperature
Agency Approvals
Low Temperature (LT) Testing
5-40 Series 90-30 PLC Installation and Hardware Manual – August 2002

Catalog Number IC693CPU374

Single slot CPU module with embedded Ethernet Interface
133 MHz
Embedded 586
0.15 milliseconds per 1K of logic (boolean contacts)
RAM and Flash
240KB (245,760) Bytes. Note: Actual size of available user
program memory depends on the amounts configured for %R,
%AI, and %AQ configurable word memory types.
2,048 (fixed)
2,048 (fixed)
1,280 bits (fixed)
4,096 bits (fixed)
256 bits (fixed)
128 bits (%S, %SA, %SB, %SC - 32 bits each) (fixed)
Configurable 128 to 32,640 words
Configurable 128 to 32,640 words
Configurable 128 to 32,640 words
28 words (fixed)
>2,000 (depends on available user memory)
Yes
1.2 months for internal battery (installed in the power supply)
15 months with external battery (IC693ACC302)
7.4 watts of 5VDC. High Capacity power supplies recommended.
Yes
8 (CPU baseplate + 7 expansion and/or remote)
Supports the periodic subroutine feature.
Yes
Yes
Yes, Hardware Floating Point Math
VersaPro 2.03 or later. CIMPLICITY Machine Edition Logic
Developer 2.60 or later. Control software version 2.50 or later.
None. Supports RS-485 port on power supply.
SNP and SNPX on power supply RS-485 port
Ethernet (built-in) – 10/100 base-T/TX Ethernet Switch
Two, both are 10/100baseT/TX ports with auto sensing. RJ-45
connection.
One
SRTP and Ethernet Global Data (EGD). No channel support.
None
0 to 60°C (32 to 140°F) ambient
-40°C to +85°C
UL508, C-UL (Class I, DIV II, A, B, C, D), CE Mark
Yes. The CPU374 is available for -40° to 60°C operation.
PS
EOK
PORT
LAN
CPU 374
STAT
ON
OFF
ETHERNET
RESTART
STATION
MGR
LINK/ACT
PORT 1
100Mbps
LINK/ACT
PORT 2
100Mbps
FRAME
GFK-0356Q