Ac/Dc Input Power Supplies; Ic693Pwr321 Standard Power Supply, 120/240 Vac Or 125 Vdc Input - GE 90-30 PLC Series Installation And Hardware Manual

4

AC/DC Input Power Supplies

IC693PWR321 Standard Power Supply, 120/240 VAC or 125 VDC Input

The IC693PWR32 is a 30 watt supply that can operate from an input voltage source in the range
of 85 to 264 VAC or 00 to 300 VDC. This power supply provides three outputs:
The load capacity for each output of this power supply is shown in the following table.
Table 4-2. IC693PWR321 Power Supply Capacities
IC693PWR32
*Total of all outputs combined cannot exceed 30 watts.
Figure 4-1. Standard AC/DC Input Power Supply - IC693PWR321
Power supplies must be installed in the leftmost slot in all baseplates.
4-2 Series 90-30 PLC Installation and Hardware Manual – August 2002
+5 VDC output,
+24 VDC Relay power output which provides power to circuits on Series 90-30 Output Relay
modules.
Isolated +24 VDC, which is used internally by some modules, can also be used to provide
external power for 24 VDC Input modules.
Catalog Load
Number Capacity
30 Watts 00 to 240 VAC or
25 VDC
IC693PWR321
CONNECTIONS
FOR
AC/DC POWER
SOURCE
INTERNAL
POWER SOURCE
FOR
MODULES REQUIRING
24VDC
Nominal
Input Output Capacities (Voltage/Power *)
+5 VDC +24 VDC Isolated
5 watts 20 watts
PWR
OK
SERIES 90-30
RUN
BATT
STANDARD
POWER SUPPLY
PROGRAMMABLE CONTROLLER
INPUT
∼
100-240 VAC
50/60HZ 90 VA
125 VDC, 50W
+
24 VDC
OUTPUT
0.8A MAX.
B
A
T
T
E
R
LITHIUM
Y
BACK-UP
BATTERY
+24 VDC Relay
5 watts
SYSTEM
STATUS
INDICATORS
RS-485
COMPATIBLE
SERIAL PORT
BATTERY
CONNECTORS
GFK-0356Q