Modem Connection Test - Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual

Transport service switch
Table of Contents

Advertisement

Stand-alone installation testing
............................................................................................................................................................................................................................................................

Modem connection test

Description
This test will verify proper modem connection to the Alcatel-Lucent 1850 TSS-60 shelf.
This test should only be performed if a modem is required.
Procedure
Proceed as follows:
........................................................................................................................................................................................................................
1
Verify the generic parameters of the modem are set to the following:
Modem Parameters
1200, 2400, 4800, 9600, or 19,200 baud
Full duplex
8 data bits
No parity bits
1 start bit
1 stop bit
No flow control
Transparent data mode - ON
Direct operating mode - ON
Note:
require other options to be set before using the modem. Refer to manufacturer's
manuals for instructions on setting modem parameters.
........................................................................................................................................................................................................................
2
Verify that the modem cable is properly connected from the modem to J18 MODEM on
the backplane of the Alcatel-Lucent 1850 TSS-60 shelf.
........................................................................................................................................................................................................................
3
Use the
........................................................................................................................................................................................................................
4
Click on the
............................................................................................................................................................................................................................................................
6 - 6 2
Modems supporting a large set of options and error detection capabilities may
GUI
to set the modem command.
Administration -> Data Communications...
Modem connection test
365-372-603R2.0
Issue 1 January 2009

Advertisement

Table of Contents
loading

Table of Contents