Table of Contents
Advertisement
Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
6
Select Line Build Out 20 (0,133) from the drop-down window.
........................................................................................................................................................................................................................
7
Select Apply to: All Ports, This Pack
........................................................................................................................................................................................................................
8
Apply
Click
Result:
Setting DS3/EC1 LBOs
The DS3/EC-1 cabling will be tested with all ports provisioned for DS3. Set DS3 LBO
values as follows.
........................................................................................................................................................................................................................
9
Refer to the following table of cable lengths and LBO values. Determine the LBO value
corresponding to the DS3/EC-1 cables installed:
........................................................................................................................................................................................................................
Use the GUI window click on Configuration:Equipment command.
10
........................................................................................................................................................................................................................
11
Double-click on a Function Group where the LNW16/LNW18/LNW19B/LNW20 or
LNW39/LNW111/LNW391/LNW84 is located.
........................................................................................................................................................................................................................
12
Select Port 1 and the first DS3 in that group.
Result:
........................................................................................................................................................................................................................
13
Select Line Build Out = In from the drop down window.
............................................................................................................................................................................................................................................................
6 - 6
to issue the command.
All DS1/E1 ports will have a LBO value of 20 for this pack.
Distance (Feet)
Cable Type 735A and
LBO Value
734D
IN
0 - 65 (default)
OUT
> 65
A provisioning page will be displayed.
LBO software settings
365-372-603R2.0
Issue 1 January 2009
Advertisement
Table of Contents
