............................................................................................................................................................................................................................................................

If required, insert a CLETOP stick into the transmit (TX) port sleeve until vertical force

can be applied to the fiber stub end surface. Rotate the CLETOP stick five full rounds.

Using the stereo zoom scope, visually inspect the optics module. If required, repeat

If required, reinstall the process plug into the optical ports to maintain cleanliness.

N D

........................................................................................................................................................

B- 1 2

CAUTION

This step should only be performed on the transmit (TX) port if the air blows

did not work. Do not perform this step on the receive (RX) port. The receive

(RX) port contains a lens for focusing a wide input. The lens is more easily

scratched than cleaned.

CAUTION

It is recommended that the process plug be installed into the optical ports on

the pluggable optics module to maintain cleanliness until the optical fiber is

connected.

T E P S

Cleaning pluggable optics module

Step

365-372-603R2.0

Issue 1 January 2009

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 324

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents