............................................................................................................................................................................................................................................................

Procedure

Proceed as follows:

Refer to the engineering job specification. Determine the function slot that the pack will

be inserted. If equipped with the VLF mains (LNW141 or LNW84) the 100/1000BASE-X

pack can be inserted into any function slots D1, D2, G1 or G2. Otherwise, if equipped

with the non-VLF mains the 100/1000BASE-X pack can be inserted only into function

slots D1 or G1.

Label the optical fiber cables, indicating bay, shelf, function group, pack, and direction (IN

or OUT).

Route optical fiber cables from the interconnecting equipment into the left side of the

Alcatel-Lucent 1850 TSS-60 and into the 100/1000BASE-X optical ports. See

"Optical fiber routing" (p.

Place the optical fiber cables in a protective tube or channel.

Check off the appropriate box in

N D

........................................................................................................................................................

3 - 7 2

3-67).

T E P S

100/1000BASE-X optical fiber cable installation

"Installation checklist" (p.

Table 3-19,

I-6).

365-372-603R2.0

Issue 1 January 2009

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 138

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents