............................................................................................................................................................................................................................................................

If a protection circuit pack is required, continue with Step 5 If not, install a 177D or

LNW98 Apparatus Blank into the protection circuit pack slot (D2 or G2 as required), then

proceed to

Important!

to provide proper air flow for cooling.

Remove the second LNW7, LNW8 or LNW801 from the packing material.

Place the circuit pack into the shelf (slot D2, or G2 as required). Do NOT engage the

circuit pack in the backplane connector.

Repeat

with LNW7, LNW8 or LNW801 circuit packs.

Check off the appropriate box in

N D

........................................................................................................................................................

LNW16 (12DS3/EC1) and LNW19B (48DS3/EC1) installation (optional)

Follow this procedure only if installing LNW16 (12DS3/EC1) or LNW19B (48DS3/EC1)

circuit packs into the Alcatel-Lucent 1850 TSS-60 shelf.

Refer to the engineering job specification. Identify the proper function group(s) where

LNW16 or LNW19B will be installed.

Remove the LNW16 or LNW19B from the packing material.

Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the

circuit pack in the backplane connector.

4 - 1 4

Step

177D or LNW98 Apparatus Blanks are required in all unused slots D and G

Step 1

through

Step 6

T E P S

for each additional function group D or G to be equipped

"Installation checklist" (p.

Initial circuit pack installation

I-6).

365-372-603R2.0

Issue 1 January 2009

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 156

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents